The Perry Zone's high-grade core is getting easier to predict — and that is the point of this round of drilling. Arizona Gold & Silver Inc. (TSXV: AZS) (OTCQB: AZASF) announced on November 18 assay results from core holes PC26-174 and PC26-175 at its Philadelphia Gold-Silver Project in Mohave County, Arizona. The northern hole, PC26-175, was drilled to test the projected position of the Perry Zone's hydrothermal upflow system beneath Red Hills — and returned the strongest combination of width and grade the current program has produced.
- PC26-175 — the broad envelope: 100.58 metres at 1.20 g/t gold and 6.8 g/t silver from 413.61 metres (0.25 g/t Au cutoff), including 50.29 metres at 2.01 g/t gold and 11.1 g/t silver from 447.14 metres.
- PC26-175 — the high-grade core: 12.65 metres at 5.22 g/t gold and 21.4 g/t silver from 483.26 metres, including 0.91 metres at 46.70 g/t gold and 58.7 g/t silver on the original fire assay.
- The check assay ran higher: a screen metallic (FA-5) check on that same 0.91-metre interval returned 59.11 g/t gold — 26.6% above the original fire assay. The company kept the original fire-assay values as the basis for all reported intervals; the screen result is a supplementary check, not a substitute grade.
- PC26-174 — the southern control hole: drilled about 60 metres vertically below PC26-173, it returned 30.60 metres at 0.64 g/t gold and 5.9 g/t silver from 486.77 metres, including 6.10 metres at 1.39 g/t gold and 17.3 g/t silver. The company interprets PC26-174 as sitting south of — and peripheral to — the upflow system; its higher silver-to-gold ratios and narrow green breccias helped vector the targeting of PC26-175 to the north.
- True thickness: intervals are drilled lengths; the company estimates true thickness at approximately 60% of drilled thickness for both holes.
- Drilling continues north: PC26-176 is complete and in the laboratory (drilled north of PC26-175, within the interpreted upflow system); PC26-177 is in progress, targeting the northern, down-plunge continuation.
- The lab and the QP: core went to Skyline Assayers & Laboratories in Tucson, Arizona (ISO 9001:2015; fire assay with AA finish, gravimetric over-limits, ICP-MS for silver and multi-elements). Technical content was reviewed and approved by Dr. Lex Lambeck, CPG (AIPG CPG-11734), Senior Vice President of Exploration.
Chasing the feeder, not just the vein
In a low-sulphidation epithermal system like Philadelphia, the broad mineralized envelope is only half the story. The economic question is where the hot fluids rose — the upflow or feeder zone — because that is where the highest grades tend to sit. PC26-175's geology supports the interpretation the company was testing: gold is hosted in green, quartz-rich hydrothermal breccias, bladed calcite has been replaced entirely by silica, and silver-to-gold ratios fall toward the bottom of the hole — six of the final seven samples returned ratios below 3:1 — a shift toward gold-dominant mineralization the company reads as increasing proximity to a gold-rich upflow zone. The 100.58-metre intersection is also spatially associated with the broad CSAMT geophysical anomaly beneath Red Hills that the program has been testing.
Senior Vice President of Exploration Dr. Lex Lambeck put the result plainly in the release: "PC26-175 has returned a substantial high grade drill intercept within a broad gold-silver intersection. Importantly the hole confirms our interpretation [that] the higher grades are defining an increasingly predictable north plunging target." He added that the results will contribute to an assessment of the potential for both bulk-tonnage and underground mining scenarios — the same two-futures question Philadelphia's broad-with-high-grade geometry has raised all season.
This release also closes a loop Pulse readers will recognize: when Arizona Gold & Silver reported PC26-172 and PC26-173 in the autumn, PC26-174 was already complete below PC26-173 and PC26-175 was being drilled 60 metres north of it. Both of those pending holes have now reported — and it was the northern one that carried the grade.
The honesty box
Philadelphia has no mineral resource estimate in this release — these are exploration drill intervals, not tonnes and grade in a compliant inventory. The headline high-grade figure needs its footnote kept attached: the 0.91-metre interval is reported at 46.70 g/t gold on the original fire assay; the 59.11 g/t screen metallic result is a check assay on a separate split, and the company explicitly did not substitute it into the reported composites — quoting 59.11 g/t as the interval grade would overstate what the release reports. All intervals are drilled lengths at roughly 60% estimated true thickness, so the 100.58-metre envelope is on the order of 60 metres true. The upflow interpretation is exactly that — an interpretation, supported by breccia textures and metal ratios in two holes — and PC26-174, drilled in the same program, shows how quickly grades moderate away from it: 0.64 g/t over its broad interval. PC26-176's contribution so far is visual logging only (a totally silicified vein intercept, increasing yellow quartz, no bladed calcite); the release itself notes visual observations do not establish gold grade.
What to watch
Assays from PC26-176, now in the laboratory; completion and assays of PC26-177, drilling down the interpreted northerly plunge; and whether the north-plunging high-grade target keeps its predictability as the step-outs get larger — the test that decides whether Philadelphia's next chapter is a resource program.

